Ingenic AI + H.265 video processor, 22nm DSP, support human detection, with high performance 2MP 1 / 2.9-inch CMOS image sensor, low illumination, Resolution at 3MP 2048x1536 @ 25fps, 2MP 1920x1080 @ 25fps. Support two-way intercom, voice broadcasting available with audio amplifier board. It support H.265 / H.264H compression format, ROI enhancement, SVC adaptive encoding, adaptive with different bandwidth and card storage. It supports Smart IR, automatically IR light compensation; support digital WDR, 3D noise reduction, glare suppression, backlight compensation, applicable to different monitoring environments. It supports a variety of abnormal detection, such as network disconnection, IP conflict, illegal access, support DC12V/POE power supply, surge protection, electrostatic prevention, lightning protection.
Main Features:
◆The highest resolution can reach 3MP (2048x1536@20fps, 1920x1080@25fps) |
◆ Built-in humanoid detection algorithm, which is an independent system to complete the humanoid recognition independently |
◆ Humanoid detection frame rate 5FPS, simultaneous detection of 5 people |
◆ Low power consumption, low bit rate, low latency |
◆ H.265 high-efficiency compression, saving bandwidth and storage space |
◆ Support Smart IR to prevent infrared overexposure at night |
◆ ICR infrared filter type automatic switching, realizing real day and night monitoring |
◆ Support POE power supply function (optional) |
◆ Expandable Micro SD card (128G) local storage |
◆ Support 3D digital noise reduction, support digital wide dynamic |
◆ Support automatic electronic shutter function, adapt to different monitoring environments |
◆ Support two-way voice intercom |
◆ Extensible support 1 alarm input / 2 alarm output |
◆ Extensible support RS485, WIFI, RESET function |
◆ Support standard Onvif access, support Email, NTP service |
◆ Support HTTPS encrypted transmission |
◆The initial device is turned on to change the password to ensure the security of the password |
Video camera | |
Master | T31N |
Image sensor | 1/2.9" 2MP progressive scan ultra-low illumination GC2063 CMOS |
Lens | Motorized lens |
Day and night conversion mode | ICR switch, automatic/color/black and white/external trigger |
Wide dynamic | Digital wide dynamic (off/low/medium/high) |
Light board control | Auto/Manual/Close |
3D noise reduction | Off/low/medium/high/high |
Dehaze | Off/low/medium/high |
Mirroring | Off/Horizontal mirroring/Vertical mirroring/180°rotation |
Image settings | Brightness, contrast, sharpness, saturation, chroma |
Number of humanoid detections | Can detect ≤5 humanoid targets at the same time |
Detect humanoid size | Humanoid pixels≥40X40 |
Humanoid detection rate | ≥99% (reach the above conditions) |
Snapshot response speed | ≤1s |
Maximum detection frame rate | 5fps/s |
False detection rate | ≤2% |
Detection site | People in any posture, including half-length, head, and hands |
Personnel tracking | support |
Detection form | Support static humanoid detection and dynamic humanoid detection |
Detection method | Support visible light image detection, support near infrared image detection |
Detection area | Support designated area, full screen by default |
Upload method | Private protocol upload |
Trigger method | Video trigger |
Video coding standard | H.265/H.264 |
Coding characteristics | Main stream: 2MP 1920x1080@25fps; Sub stream: D1(720*576), VGA(640*360) |
Maximum image resolution | 2MP (1920x1080@25fps) |
Video bitrate | Fixed bit rate, variable bit rate (main stream: 16Kbps-32Mbps) |
Video type | Composite stream/video stream |
Audio coding standard | G.711u / 64Kbps |
Network protocol | TCP/IP,UDP,HTTP,HTTPS,DHCP,RTSP,DDNS,NTP,PPPOE,UPNP,SMTP |
Interface Protocol | ONVIF, GB28181 (optional) |
Safe mode |
Authorized user name and password, HTTPS encryption, AES connection encryption, RTSP authentication |
Motion Detection | Set detection area, multi-level sensitivity can be set |
Block alarm | Support 1 regional setting |
Privacy masking | Support 4 area blocking blocks |
Event linkage | Snapshot, TF card video, send Email, alarm output linkage |
Supplementary recording of disconnected netork |
support |
Equipment anomaly detection | Support network disconnection, IP conflict, illegal access alarm |
Character Overlay (OSD) | Title, time and date superimposed, multi-line OSD, OSD color optional |
Network Interface | RJ45 10M/100M network adaptive |
Audio | MIC line input/line output |
WIFI | Support (expansion board) |
Alarm input/Output | 1 input (expansion board), 2 outputs (expansion board) |
reset button | Support (expansion board) |
RS485 interface | Support (expansion board) |
TF storage | Support up to 128G, Micro SD (EXT3/EXT4) card local storage (expansion board) |
power supply | DC12V /POE optional (POE optional) |
Equipment size | 38x38mm |
Operating temperature | -10°C ~ 50°C |